Electronic Theses and Dissertation
Universitas Syiah Kuala
NULL
PERBANDINGAN KECEPATAN PUTAR ROTOR KINCIR ANGIN BERPOSISI HORIZONTAL DAN VERTIKAL
Pengarang
Muhammad Iqbal - Personal Name;
Dosen Pembimbing
Nomor Pokok Mahasiswa
1708002020005
Fakultas & Prodi
Fakultas MIPA / Teknik Elektronika (D3) / PDDIKTI : 20401
Subject
Kata Kunci
Penerbit
Banda Aceh : Universitas Syiah Kuala., 2021
Bahasa
Indonesia
No Classification
-
Literature Searching Service
Hard copy atau foto copy dari buku ini dapat diberikan dengan syarat ketentuan berlaku, jika berminat, silahkan hubungi via telegram (Chat Services LSS)
ABSTRAK
Turbin Savonius merupakan turbin sumbu vertikal yang dapat beroperasi dengan baik pada kecepatan angin rendah. Secara umum kinerja turbin dipengaruhi oleh beberapa faktor, salah satunya adalah bentuk aerodinamis turbin. Turbin Angin Sumbu Horizontal adalah kincir angin yang memiliki poros utama sejajar dengan tanah dan arah poros utama sesuai dengan arah datangnya angin. Terdiri dari sebuah menara dan sebuah kincir yang dipasang dipuncak menara kincir. Poros kincir jenis ini dapat berputar 360 derjat terhadap sumbu vertikal untuk menangkap dan menyesuaikan arah angin. Tujuan dari penelitian ini untuk membandingkan kecepatan putar kincir angin dari blade menggunakan plat rata dengan posisi horizontal dan blade menggunakan drum minyak dengan posisi vertikal yang akan berputar pada tekanan angin yang sama.
Kata kunci : Turbin angin sumbu vertikal, rotor Savonius L, aerodinamis turbin
ABSTRACT
Savonius turbines are vertical axis turbines that can operate properly at low wind speeds. In general, turbine performance is influenced by several factors, one of which is the aerodynamic form of the turbine. Horizontal Axis Wind Turbine is a windmill that has the main shaft parallel to the ground and the direction of the main shaft according to the direction of arrival of the wind. It consists of a tower and a ferris wheel mounted at the top of the ferris wheel tower. This type of ferris wheel shaft can rotate 360 degrees against the vertical axis to capture and adjust wind direction. The purpose of this study was to compare the windmill rotation speed of the blade using a flat plate with a horizontal position and the blade using an oil drum with a vertical position that would rotate at the same wind pressure.
Keywords: Vertical axis wind turbine, Savonius L rotor, aerodynamic turbine
Tidak Tersedia Deskripsi
UJI PERFORMA KINCIR ANGIN DARRIEUS-H DENGAN BAHAN SUDU DARI KAYU (Fariza Amri, 2017)
PERENCANAAN KINCIR ANGIN BERSUDU BANYAK UNTUK MENGGERAKKAN POMPA (Rusdiansyah, 2024)
STUDI PENGARUH JUMLAH SUDU KINCIR ANGIN SUMBU HORIZONTAL TERHADAP PUTARAN POROS (Ikhsan Fahriza, 2018)
PERENCANAAN PROTOTIPE SISTEM KONVERSI ENERGI ANGIN PENGGERAK POMPA (Zulkarnain, 2024)
PERENCANAAN PROTOTIPE SISTEM KONVERSI ENERGI ANGIN PENGGERAK LISTRIK (Hasbi, 2024)